Net::LDAP - Lightweight Directory Access Protocol


NAME

Net::LDAP - Lightweight Directory Access Protocol


SYNOPSIS

 use Net::LDAP;
 $ldap = Net::LDAP->new( 'ldap.bigfoot.com' ) or die "$@";
 $mesg = $ldap->bind ;    # an anonymous bind
 $mesg = $ldap->search( # perform a search
                        base   => "c=US",
                        filter => "(&(sn=Barr) (o=Texas Instruments))"
                      );
 $mesg->code && die $mesg->error;
 foreach $entry ($mesg->entries) { $entry->dump; }
 $mesg = $ldap->unbind;   # take down session
 $ldap = Net::LDAP->new( 'ldap.umich.edu' );
 # bind to a directory with dn and password
 $mesg = $ldap->bind( 'cn=root, o=University of Michigan, c=us',
                      password => 'secret'
                    );
 $result = $ldap->add( 'cn=Barbara Jensen, o=University of Michigan, c=US',
                       attr => [
                         'cn'   => ['Barbara Jensen', 'Barbs Jensen'],
                         'sn'   => 'Jensen',
                         'mail' => 'b.jensen@umich.edu',
                         'objectclass' => ['top', 'person',
                                           'organizationalPerson',
                                           'inetOrgPerson' ],
                       ]
                     );
 $result->code && warn "failed to add entry: ", $result->error ;
 $mesg = $ldap->unbind;  # take down session


DESCRIPTION

Net::LDAP is a collection of modules that implements a LDAP services API for Perl programs. The module may be used to search directories or perform maintenance functions such as adding, deleting or modifying entries.

This document assumes that the reader has some knowledge of the LDAP protocol.


CONSTRUCTOR

new ( HOST, OPTIONS )
Creates a new Net::LDAP object and opens a connection to the named host.

HOST may be a host name or an IP number. TCP port may be specified after the host name followed by a colon (such as localhost:10389). The default TCP port for LDAP is 389.

You can also specify a URI, such as 'ldaps://127.0.0.1:666' or 'ldapi://%2fvar%2flib%2fldap_sock'. Note that '%2f's in the LDAPI socket path will be translated into '/'. This is to support LDAP query options like base, search etc. although the query part of the URI will be ignored in this context. If port was not specified in the URI, the default is either 389 or 636 for 'LDAP' and 'LDAPS' schemes respectively.

HOST may also be a reference to an array of hosts, host-port pairs or URIs to try. Each will be tried in order until a connection is made. Only when all have failed will the result of undef be returned.

port => N
Port to connect to on the remote server. May be overridden by HOST.

scheme => 'ldap' | 'ldaps' | 'ldapi'
Connection scheme to use when not using an URI as HOST. (Default: ldap)

timeout => N
Timeout passed to the IO::Socket manpage when connecting the remote server. (Default: 120)

multihomed => N
Will be passed to the IO::Socket manpage as the MultiHomed parameter when connecting to the remote server

localaddr => HOST
Will be passed to the IO::Socket manpage as the LocalAddr parameter, which sets the client's IP address (as opposed to the server's IP address.)

debug => N
Set the debug level. See the debug method for details.

async => 1
Perform all operations asynchronously.

onerror => 'die' | 'warn' | undef | sub { ... }
In synchronous mode, change what happens when an error is detected.
'die'
Net::LDAP will croak whenever an error is detected.

'warn'
Net::LDAP will warn whenever an error is detected.

undef
Net::LDAP will warn whenever an error is detected and -w is in effect. The method that was called will return undef.

sub { ... }
The given sub will be called in a scalar context with a single argument, the result message. The value returned will be the return value for the method that was called.

version => N
Set the protocol version being used (default is LDAPv3). This is useful if you want to talk to an old server and therefore have to use LDAPv2.

raw => REGEX
Use REGEX to denote the names of attributes that are to be considered binary in search results.

When running on Perl 5.8 and this option is given Net::LDAP converts all values of attributes not matching this REGEX into Perl UTF-8 strings so that the regular Perl operators (pattern matching, ...) can operate as one expects even on strings with international characters.

If this option is not given or the version of Perl Net::LDAP is running on is too old strings are encoded the same as in earlier versions of perl-ldap.

Example: raw => qr/(?i:^jpegPhoto|;binary)/

inet6 => N
Try to connect to the server using IPv6 if HOST resolves to an IPv6 target address. If it resolves to an IPv4 address, the connection is tried using IPv4, the same way as if this option was not given.

Please note that IPv6 support is considered experimental in IO::Socket::SSL, which is used of SSL/TLS support, and there are a few issues to take care of. See IPv6 in the IO::Socket::SSL manpage for details.

Example

  $ldap = Net::LDAP->new( 'remote.host', async => 1 );

LDAPS connections have some extra valid options, see the start_tls method for details. Note the default value for 'sslversion' for LDAPS is 'sslv2/3', and the default port for LDAPS is 636.

For LDAPI connections, HOST is actually the location of a UNIX domain socket to connect to. The default location is '/var/run/ldapi'.


METHODS

Each of the following methods take as arguments some number of fixed parameters followed by options, these options are passed in a named fashion, for example

  $mesg = $ldap->bind( "cn=me,o=example", password => "mypasswd");

The return value from these methods is an object derived from the the Net::LDAP::Message manpage class. The methods of this class allow you to examine the status of the request.

abandon ( ID, OPTIONS )
Abandon a previously issued request. ID may be a number or an object which is a sub-class of the Net::LDAP::Message manpage, returned from a previous method call.
control => CONTROL
control => [ CONTROL, ... ]
See CONTROLS below

callback => CALLBACK
See CALLBACKS below

Example

  $res = $ldap->search( @search_args );
  $mesg = $ldap->abandon( $res ); # This could be written as $res->abandon
add ( DN, OPTIONS )
Add a new entry to the directory. DN can be either a the Net::LDAP::Entry manpage object or a string.
attrs => [ ATTR => VALUE, ... ]
VALUE should be a string if only a single value is wanted, or a reference to an array of strings if multiple values are wanted.

This argument is not used if DN is a the Net::LDAP::Entry manpage object.

control => CONTROL
control => [ CONTROL, ... ]
See CONTROLS below

callback => CALLBACK
See CALLBACKS below

Example

  # $entry is an object of class Net::LDAP::Entry
  $mesg = $ldap->add( $entry );
  $mesg = $ldap->add( $dn,
                      attrs => [
                        name  => 'Graham Barr',
                        attr  => 'value1',
                        attr  => 'value2',
                        multi => [qw(value1 value2)]
                      ]
                    );
bind ( DN, OPTIONS )
Bind (log in) to the server. DN is the DN to bind with. An anonymous bind may be done by calling bind without any arguments.
control => CONTROL
control => [ CONTROL, ... ]
See CONTROLS below

callback => CALLBACK
See CALLBACKS below

noauth | anonymous => 1
Bind without any password. The value passed with this option is ignored.

password => PASSWORD
Bind with the given password.

sasl => SASLOBJ
Bind using a SASL mechanism. The argument given should be a sub-class of the Authen::SASL manpage.

Example

  $mesg = $ldap->bind; # Anonymous bind
  $mesg = $ldap->bind( $dn, password => $password );
  # $sasl is an object of class Authen::SASL
  $mesg = $ldap->bind( $dn, sasl => $sasl, version => 3 );
compare ( DN, OPTIONS )
Compare values in an attribute in the entry given by DN on the server. DN may be a string or a the Net::LDAP::Entry manpage object.
attr => ATTR
The name of the attribute to compare.

value => VALUE
The value to compare with.

control => CONTROL
control => [ CONTROL, ... ]
See CONTROLS below.

callback => CALLBACK
See CALLBACKS below.

Example

  $mesg = $ldap->compare( $dn,
                          attr  => 'cn',
                          value => 'Graham Barr'
                        );
delete ( DN, OPTIONS )
Delete the entry given by DN from the server. DN may be a string or a the Net::LDAP::Entry manpage object.
control => CONTROL
control => [ CONTROL, ... ]
See CONTROLS below.

callback => CALLBACK
See CALLBACKS below.

Example

 $mesg = $ldap->delete( $dn );
moddn ( DN, OPTIONS )
Rename the entry given by DN on the server. DN may be a string or a the Net::LDAP::Entry manpage object.
newrdn => RDN
This value should be a new RDN to assign to DN.

deleteoldrdn => 1
This option should be passwd if the existing RDN is to be deleted.

newsuperior => NEWDN
If given this value should be the DN of the new superior for DN.

control => CONTROL
control => [ CONTROL, ... ]
See CONTROLS below.

callback => CALLBACK
See CALLBACKS below.

Example

 $mesg = $ldap->moddn( $dn, newrdn => 'cn=Graham Barr' );
modify ( DN, OPTIONS )
Modify the contents of the entry given by DN on the server. DN may be a string or a the Net::LDAP::Entry manpage object.
add => { ATTR => VALUE, ... }
Add more attributes or values to the entry. VALUE should be a string if only a single value is wanted in the attribute, or a reference to an array of strings if multiple values are wanted.

delete => [ ATTR, ... ]
Delete complete attributes from the entry.

delete => { ATTR => VALUE, ... }
Delete individual values from an attribute. VALUE should be a string if only a single value is being deleted from the attribute, or a reference to an array of strings if multiple values are being deleted.

replace => { ATTR => VALUE, ... }
Replace any existing values in each given attribute with VALUE. VALUE should be a string if only a single value is wanted in the attribute, or a reference to an array of strings if multiple values are wanted. A reference to an empty array will remove the entire attribute.

changes => [ OP => [ ATTR => VALUE ], ... ]
This is an alternative to add, delete and replace where the whole operation can be given in a single argument. OP should be add, delete or replace. VALUE should be either a string or a reference to an array of strings, as before.

Use this form if you want to control the order in which the operations will be performed.

control => CONTROL
control => [ CONTROL, ... ]
See CONTROLS below.

callback => CALLBACK
See CALLBACKS below.

Example

 $mesg = $ldap->modify( $dn, add => { sn => 'Barr' } );
 $mesg = $ldap->modify( $dn, delete => [qw(faxNumber)] );
 $mesg = $ldap->modify( $dn, delete => { 'telephoneNumber' => '911' } );
 $mesg = $ldap->modify( $dn, replace => { 'mail' => 'gbarr@pobox.com' } );
 $mesg = $ldap->modify( $dn,
                        changes => [
                            # add sn=Barr
                          add     => [ sn => 'Barr' ],
                            # delete all fax numbers
                          delete  => [ faxNumber => []],
                            # delete phone number 911
                          delete  => [ telephoneNumber => ['911']],
                            # change email address
                          replace => [ mail => 'gbarr@pobox.com']
                        ]
                      );
search ( OPTIONS )
Search the directory using a given filter. This can be used to read attributes from a single entry, from entries immediately below a particular entry, or a whole subtree of entries.

The result is an object of class the Net::LDAP::Search manpage.

base => DN
The DN that is the base object entry relative to which the search is to be performed.

scope => 'base' | 'one' | 'sub'
By default the search is performed on the whole tree below the specified base object. This maybe changed by specifying a scope parameter with one of the following values:
base
Search only the base object.

one
Search the entries immediately below the base object.

sub
Search the whole tree below (and including) the base object. This is the default.

deref => 'never' | 'search' | 'find' | 'always'
By default aliases are dereferenced to locate the base object for the search, but not when searching subordinates of the base object. This may be changed by specifying a deref parameter with one of the following values:
never
Do not dereference aliases in searching or in locating the base object of the search.

search
Dereference aliases in subordinates of the base object in searching, but not in locating the base object of the search.

find
Dereference aliases in locating the base object of the search, but not when searching subordinates of the base object. This is the default.

always
Dereference aliases both in searching and in locating the base object of the search.

sizelimit => N
A sizelimit that restricts the maximum number of entries to be returned as a result of the search. A value of 0, and the default, means that no restriction is requested. Servers may enforce a maximum number of entries to return.

timelimit => N
A timelimit that restricts the maximum time (in seconds) allowed for a search. A value of 0 (the default), means that no timelimit will be requested.

typesonly => 1
Only attribute types (no values) should be returned. Normally attribute types and values are returned.

filter => FILTER
A filter that defines the conditions an entry in the directory must meet in order for it to be returned by the search. This may be a string or a the Net::LDAP::Filter manpage object. Values inside filters may need to be escaped to avoid security problems; see the Net::LDAP::Filter manpage for a definition of the filter format, including the escaping rules.

attrs => [ ATTR, ... ]
A list of attributes to be returned for each entry that matches the search filter.

If not specified, then the server will return the attributes that are specified as accessible by default given your bind credentials.

Certain additional attributes such as ``createTimestamp'' and other operational attributes may also be available for the asking:

  $mesg = $ldap->search( ... ,
                         attrs => ['createTimestamp']
                       );

To retrieve the default attributes and additional ones, use '*'.

  $mesg = $ldap->search( ... ,
                         attrs => ['*', 'createTimestamp']
                       );

To retrieve no attributes (the server only returns the DNs of matching entries), use '1.1':

  $mesg = $ldap->search( ... ,
                         attrs => ['1.1']
                       );

control => CONTROL
control => [ CONTROL, ... ]
See CONTROLS below.

callback => CALLBACK
See CALLBACKS below.

raw => REGEX
Use REGEX to denote the names of attributes that are to be considered binary in search results.

When running on Perl 5.8 and this option is given Net::LDAP converts all values of attributes not matching this REGEX into Perl UTF-8 strings so that the regular Perl operators (pattern matching, ...) can operate as one expects even on strings with international characters.

If this option is not given or the version of Perl Net::LDAP is running on is too old strings are encodeed the same as in earlier versions of perl-ldap.

The value provided here overwrites the value inherited from the constructor.

Example: raw => qr/(?i:^jpegPhoto|;binary)/

Example

 $mesg = $ldap->search(
                        base   => $base_dn,
                        scope  => 'sub',
                        filter => '(|(objectclass=rfc822mailgroup)(sn=jones))'
                      );
 Net::LDAP::LDIF->new( \*STDOUT,"w" )->write( $mesg->entries );
start_tls ( OPTIONS )
Calling this method will convert the existing connection to using Transport Layer Security (TLS), which provides an encrypted connection. This is only possible if the connection uses LDAPv3, and requires that the server advertizes support for LDAP_EXTENSION_START_TLS. Use supported_extension in the Net::LDAP::RootDSE manpage to check this.
verify => 'none' | 'optional' | 'require'
How to verify the server's certificate:
none
The server may provide a certificate but it will not be checked - this may mean you are be connected to the wrong server

optional
Verify only when the server offers a certificate

require
The server must provide a certificate, and it must be valid.

If you set verify to optional or require, you must also set either cafile or capath. The most secure option is require.

sslversion => 'sslv2' | 'sslv3' | 'sslv2/3' | 'tlsv1'
This defines the version of the SSL/TLS protocol to use. Defaults to 'tlsv1'.

ciphers => CIPHERS
Specify which subset of cipher suites are permissible for this connection, using the standard OpenSSL string format. The default value is 'ALL', which permits all ciphers, even those that don't encrypt.

clientcert => '/path/to/cert.pem'
clientkey => '/path/to/key.pem'
keydecrypt => sub { ... }
If you want to use the client to offer a certificate to the server for SSL authentication (which is not the same as for the LDAP Bind operation) then set clientcert to the user's certificate file, and clientkey to the user's private key file. These files must be in PEM format.

If the private key is encrypted (highly recommended) then keydecrypt should be a subroutine that returns the decrypting key. For example:

 $ldap = Net::LDAP->new( 'myhost.example.com', version => 3 );
 $mesg = $ldap->start_tls(
                           verify => 'require',
                           clientcert => 'mycert.pem',
                           clientkey => 'mykey.pem',
                           keydecrypt => sub { 'secret'; },
                           capath => '/usr/local/cacerts/'
                         );

capath => '/path/to/servercerts/'
cafile => '/path/to/servercert.pem'
When verifying the server's certificate, either set capath to the pathname of the directory containing CA certificates, or set cafile to the filename containing the certificate of the CA who signed the server's certificate. These certificates must all be in PEM format.

The directory in 'capath' must contain certificates named using the hash value of the certificates' subject names. To generate these names, use OpenSSL like this in Unix:

    ln -s cacert.pem `openssl x509 -hash -noout < cacert.pem`.0

(assuming that the certificate of the CA is in cacert.pem.)

checkcrl => 1
If capath has been configured, then it will also be searched for certificate revocation lists (CRLs) when verifying the server's certificate. The CRLs' names must follow the form hash.rnum where hash is the hash over the issuer's DN and num is a number starting with 0.

See SSL_check_crl in the IO::Socket::SSL manpage for further information.

unbind ( )
The unbind method does not take any parameters and will unbind you from the server. Some servers may allow you to re-bind or perform other operations after unbinding. If you wish to switch to another set of credentials while continuing to use the same connection, re-binding with another DN and password, without unbind-ing, will generally work.

Example

 $mesg = $ldap->unbind;

The following methods are for convenience, and do not return Net::LDAP::Message objects.

async ( VALUE )
If VALUE is given the async mode will be set. The previous value will be returned. The value is true if LDAP operations are being performed asynchronously.

certificate ( )
Returns an X509_Certificate object containing the server's certificate. See the IO::Socket::SSL documentation for information about this class.

For example, to get the subject name (in a peculiar OpenSSL-specific format, different from RFC 1779 and RFC 2253) from the server's certificate, do this:

    print "Subject DN: " . $ldaps->certificate->subject_name . "\n";

cipher ( )
Returns the cipher mode being used by the connection, in the string format used by OpenSSL.

debug ( VALUE )
If VALUE is given the debug bit-value will be set. The previous value will be returned. Debug output will be sent to STDERR. The bits of this value are:
 1   Show outgoing packets (using asn_hexdump).
 2   Show incoming packets (using asn_hexdump).
 4   Show outgoing packets (using asn_dump).
 8   Show incoming packets (using asn_dump).

The default value is 0.

disconnect ( )
Disconnect from the server

root_dse ( OPTIONS )
The root_dse method retrieves cached information from the server's rootDSE.
attrs => [ ATTR, ... ]
A reference to a list of attributes to be returned. If not specified, then the following attributes will be requested
  subschemaSubentry
  namingContexts
  altServer
  supportedExtension
  supportedFeatures
  supportedControl
  supportedSASLMechanisms
  supportedLDAPVersion

The result is an object of class the Net::LDAP::RootDSE manpage.

Example

 my $root = $ldap->root_dse;
 # get naming Context
 $root->get_value( 'namingContext', asref => 1 );
 # get supported LDAP versions
 $root->supported_version;

As the root DSE may change in certain circumstances - for instance when you change the connection using start_tls - you should always use the root_dse method to return the most up-to-date copy of the root DSE.

schema ( OPTIONS )
Read schema information from the server.

The result is an object of class the Net::LDAP::Schema manpage. Read this documentation for further information about methods that can be performed with this object.

dn => DN
If a DN is supplied, it will become the base object entry from which the search for schema information will be conducted. If no DN is supplied the base object entry will be determined from the rootDSE entry.

Example

 my $schema = $ldap->schema;
 # get objectClasses
 @ocs = $schema->all_objectclasses;
 # Get the attributes
 @atts = $schema->all_attributes;
socket ( )
Returns the underlying IO::Socket object being used.

host ( )
Returns the host to which the connection was established. For LDAPI connections the socket path is returned.

port ( )
Returns the the port connected to or undef in case of LDAPI connections.

uri ( )
Returns the URI connected to.

As the value returned is that element of the constructor's HOST argument with which the connection was established this may or may not be a legal URI.

scheme ( )
Returns the scheme of the connection. One of ldap, ldaps or ldapi.

sync ( MESG )
Wait for a given MESG request to be completed by the server. If no MESG is given, then wait for all outstanding requests to be completed.

Returns an error code defined in the Net::LDAP::Constant manpage.

process ( MESG )
Process any messages that the server has sent, but do not block. If MESG is specified then return as soon as MESG has been processed.

Returns an error code defined in the Net::LDAP::Constant manpage.

version ( )
Returns the version of the LDAP protocol that is being used.


CONTROLS

Many of the methods described above accept a control option. This allows the user to pass controls to the server as described in LDAPv3.

A control is a reference to a HASH and should contain the three elements below. If any of the controls are blessed then the method to_asn will be called which should return a reference to a HASH containing the three elements described below.

For most purposes the Net::LDAP::Control manpage objects are the easiest way to generate controls.

type => OID
This element must be present and is the name of the type of control being requested.

critical => FLAG
critical is optional and should be a boolean value, if it is not specified then it is assumed to be false.

value => VALUE
If the control being requested requires a value then this element should hold the value for the server.


CALLBACKS

Most of the above commands accept a callback option. This option should be a reference to a subroutine. This subroutine will be called for each packet received from the server as a response to the request sent.

When the subroutine is called the first argument will be the the Net::LDAP::Message manpage object which was returned from the method.

If the request is a search then multiple packets can be received from the server. Each entry is received as a separate packet. For each of these the subroutine will be called with a the Net::LDAP::Entry manpage object as the second argument.

During a search the server may also send a list of references. When such a list is received then the subroutine will be called with a the Net::LDAP::Reference manpage object as the second argument.


LDAP ERROR CODES

Net::LDAP also exports constants for the error codes that can be received from the server, see the Net::LDAP::Constant manpage.


SEE ALSO

the Net::LDAP::Constant manpage, the Net::LDAP::Control manpage, the Net::LDAP::Entry manpage, the Net::LDAP::Filter manpage, the Net::LDAP::Message manpage, the Net::LDAP::Reference manpage, the Net::LDAP::Search manpage, the Net::LDAP::RFC manpage

The homepage for the perl-ldap modules can be found at http://ldap.perl.org/.


ACKNOWLEDGEMENTS

This document is based on a document originally written by Russell Fulton <r.fulton@auckland.ac.nz>.

Chris Ridd <chris.ridd@isode.com> for the many hours spent testing and contribution of the ldap* command line utilities.


MAILING LIST

A discussion mailing list is hosted by the Perl Foundation at <perl-ldap@perl.org> No subscription is necessary!


BUGS

We hope you do not find any, but if you do please report them to the mailing list.

If you have a patch, please send it as an attachment to the mailing list.


AUTHOR

Graham Barr <gbarr@pobox.com>


COPYRIGHT

Copyright (c) 1997-2004 Graham Barr. All rights reserved. This program is free software; you can redistribute it and/or modify it under the same terms as Perl itself.

 Net::LDAP - Lightweight Directory Access Protocol